yardman

The Design of Carbon block Stacking Crane;

碳块堆垛天车的夹具设计

The full-scale experimental method is used to study the characteristics and behaviors of fire and flame development of the simulated standard component of electrical household appliance in different rack and stacking forms unprotected by sprinklers.

采用实尺实验的方法,针对模拟家电类商品的标准组件,就商品货架摆放和堆垛摆放的不同形式,研究在无水喷淋保护的条件下火灾发展和火焰传播的特性。

To handle the separating, cutting and stacking problems in production of playing card in China, pipelining mode involving auto separation with discal blade, auto-stacking with stacking framework was adopted distinct from traditional mode of punching separating, manual neatening and stacking.

针对国内扑克牌生产中的印后分切、堆垛问题,大胆突破国内原有的冲压分切、人工整理堆垛的生产模式,改为圆盘刀自动分切、堆垛机构自动堆垛的流水线生产模式,研制了扑克牌自动分切机。

The temperature and humidity distributing conditions of ammunition depot on the ground is tested,initial research on the ammunition quality change of different pile positions in the long-term storage is conducted for the different temperature and humidity.

测试地面弹药库房环境温湿度分布情况,初步研究由于温湿度差异的影响,长期储存过程中不同堆垛位置弹药质量变化情况;研究所得结论对我军弹药储存管理工作提出了新方法。

Based on the actual fire characteristics in home electrical appliances emporium,the full-size fire experimental study was carried out with simulated typical assemblies of home appliances in shelved and piled forms.

根据家电商场火灾的实际特点,对货架和堆垛两种摆放形式的模拟家电标准组件进行了全尺寸的火灾实验研究。

This paper conceives a digitizing pile based on the analysis of the characteristics of pack ammunition storage and management.

通过对箱装弹药储存管理特点的分析,提出了堆积管理数字化的构想,给出了典型的弹药堆垛结构算法模型,进行了弹药堆积管理软件的初步设计。

Study and design on the piling model of section steel;

型钢堆垛型式的设计研究

Temperature distribution during wheel piling is simulated using the thermal analysis module as well as "element birth and death" and contact features of finite element analysis software ANSYS (Ver 6.

0的热分析模块以及“单元生死”和接触功能,成功地模拟了车轮堆垛过程的温度场,为等温过程温度场的模拟奠定了基础。

Treated as the bin packing problem, the depository loading problem of cool steel coils is discussed for the annealing shop of a cool steel rolling factory.

讨论某冷轧厂热处理车间冷卷入库堆垛问题 ,并将其归结为装箱问题进行研究。

The depository loading problem of cool steel coils is discussed for the annealing shop of cool steel rolling factory of an iron and steel corporation, which is treated as bin packing problem of combinatorial optimization.

本文主要讨论了某钢铁公司冷轧厂热处理车间前库的冷卷入库堆垛问题,通过将其归结为组合优化中的装箱问题来进行研究。

suspended stacking crane

悬挂桥式堆垛起重机

piling and burning

堆垛烧除法(废材处理)

low stacking fault energy crystal

低堆垛层错能的晶体

Free In and Out and Stowed and Trimmed

船方不负担装卸、堆垛和平舱费

Lifting appliances--Vocabulary--Stacking cranes

GB/T6974.17-1986起重机械名词术语堆垛起重机

Mound- A raised defect on the surface of a wafer measuring more than0.25 mm.

堆垛-晶圆片表面超过0.25毫米的缺陷。

Dynamic Performance Analysis on Key Parts of Aluminum Ingots Stacker;

铝锭堆垛机关键部件的动态性能分析

Dynamic Performance Analysis on the Turnover Mechanism of Aluminum Ingots Stacker;

铝锭堆垛机翻转装置的动态性能分析

Research & Application of the Control Strategy on Stacker Crane Hoist System;

堆垛机提升系统控制策略研究与应用

Dynamic Response Simulation of Stacker Crane Elevating Table;

巷道堆垛机升降台结构动态仿真分析

Real-time Control of Stacking Machine Based on Windows System:Its Software Design;

“基于Windows的堆垛机实时控制”软件设计

Design of the Level Moving Machinery for S/R Machine;

有轨巷道堆垛机水平运行机构的设计

The Mechanical Analysis of Stacker Based on ANSYS

基于ANSYS的堆垛机结构力学分析

Analysis of Mast Deflection of Single Mast Stack-crane and Its Matlab Simulation

单立柱堆垛机立柱挠度分析与Matlab仿真

On Dispatching for the Joint Working of Multi-Laneway-Stacker

多巷道堆垛机联合作业调度问题研究

The Mechanical Model and Research of Tunnel-stacker Goods Fork

巷道式堆垛机货叉的力学模型及研究

The Vibration Analysis for the Framework of the 22t/h Stacker

22t/h铝锭堆垛机机体振动分析

Rigidity Analysis of Stacker Based on ANSYS

基于ANSYS的堆垛机立柱刚度的分析