Based on the production of RUT300,a technique of production of high-ductility vermicular graphite iron as-casting condition is shown.
以生产 RuT300为基础,介绍了铸态高韧性蠕铁的生产过程,分析了化学成份、脱硫过程、蠕化及孕育处理等工艺因素对蠕铁生产过程的影响。
malleable castiron
韧性铸铁, 可锻铸铁
Ancient Chinese Artifacts of Forgeable Cast Iron
中国古代韧性铸铁件
The Fracture Toughness of Shaped Ferritic Ductile Iron by Horizontal Continuous Cast
水平连铸铁索体球墨铸铁型材的断裂韧性
Study of the fracture toughness of ductile cast iron (DCI) and malleable cast iron (MCI)
球墨铸铁和可锻铸铁的断裂韧性的研究
Characteristics and Toughness Control Factors for S.G.Cast Iron with High Toughness in Lower Temperature
低温高韧性球墨铸铁特点及韧性控制因素
centrifugal ductile iron pipe
高压韧性离心球墨铸铁管
Production of as cast automobile parts of s.g. cast iron with high strength and toughness
高强度/高韧性铸态汽车球墨铸铁件生产技术
The Experiment Research on As-Cast High Toughness Ductile Iron Cooling Wall for Blast Furnace;
铸态高韧性球墨铸铁高炉冷却壁的试验研究
Studies on Improving Toughness and Widening Application of High Chromium White Cast Iron
改善高铬白口铸铁韧性扩大其应用范围的研究
Study on Relation between Fracture toughness and Temperature for Nodular cast iron;
球墨铸铁断裂韧性随温度变化规律的研究
"also known as nodular cast iron and spheroidal graphite iron, ductile iron solidifies with free carbon in a spheroidal graphite from."
也称为可锻(韧性)铸铁或球状石墨铸铁,以球状石墨形式存在的游离碳使球墨铸铁变得更加坚固。
A STUDY OF ABRASIVE RESISTANCE AND FRACTURE TOUGHNESS OF HIGH-Gr WHITE CAST IRON
高铬白口铸铁抗磨粒磨损耐磨性与断裂韧性的研究
Influence of Carbon Content on the Microstructure Hardness and Impact Toughness in High Chromium White Cast Iron
含碳量对高铬白口铸铁组织、硬度及冲击韧性的影响
The Influence of Heat Treatment Technology on the Impact Toughness and Hardness of White Cast Iron With Low Cr and Cu.
热处理工艺对低铬铜白口铸铁冲击韧性和硬度的影响
Study on Improving Impact Toughness and Friction Welding Technology of Ductile Cast Iron;
球墨铸铁冲击韧性的改善及其摩擦焊接工艺的研究
Effect of microstructure evolution of high chromium cast iron grate bars for Bayan Obo ore sintering on the impact toughness
白云鄂博矿烧结用高铬铸铁篦条组织演变对冲击韧性的影响
Influences of RE-Containing Composite Modifiers on Impact Toughness of Rich Chromium Cast Iron Castings
含稀土的复合变质剂对高铬铸铁冲击韧性的改善
"Optimum ductility is obtained with a ferritic matrix, so all NIBCO ductile iron is treated with a ferritizing annealing cycle."
由于最佳的韧性都是来自铁素基体,所以所有美国尼伯科球墨铸铁都经过铁素体退火韧化过程处理。
本站部份资料来自网络或由网友提供,如有问题请速与我们联系,我们将立即处理!
Copyright © 2013-2024 杭州优配网络科技有限公司 All Rights Reserved 浙ICP备20019715号
免责声明:本站非营利性站点,以方便网友为主,仅供学习。合作/投诉联系QQ:1553292129