strip coating

Exfoliation Reaction and Recombination of the Layered Hydroxide Zinc Benzoate with a Basal Spacing of 1.44 nm;

层间距为1.44nm层状氢氧化苯甲酸锌剥离重组行为研究

Reason analysis and countermeasures of the trouble of the integrated wheel exfoliation for DF_(4D) and DF_(11) locomotives;

DF_(4D)、DF_(11)型机车整体车轮剥离的原因分析及对策

The property and organieal modification of montmorillonite are also reviewed,and it is indicated that the key issue in preparing epoxy/montmorillonite nanocomposites at present is to achieve exfoliation or delamination of the aggregates in.

阐述了蒙脱土的性质及其在基体树脂中的剥离机理、环氧树脂/蒙脱土纳米复合材料的制备方法。

Then the macro and micro fracture,chemical composition and microstructure of stripping fragment were analyzed.

工作轧辊CSP热轧机连续发生三起大面积剥离事故,为找出轧辊发生连续剥离原因,首先对事故现场进行了调查分析,其次对剥离碎片的断口宏微观、化学成分及显微组织进行了分析。

It has an excellent effect on stripping and cleaning germs,algae and slime and also in.

TS - 781对菌藻和生物粘泥具有极佳的剥离、清洗作用。

Through the calculation of gear shaped, citrus shaped and cross shaped cross section boundary length, the relationship between stripping difficulty and cross section of composite superfine fiber was explained, which stripping difficulty increases with the increase of boundary length of two components.

通过对齿轮形、米字形、桔瓣形复合超细纤维截面边界长度的计算，说明了复合超细纤维的截面形状与剥离性的关系，剥离难度随两组分边界线长度的增大而增大。

Delamination and Aromatic Amine Intercalation of Layered Microporous Aluminophosphate;

芳香胺对微孔层状磷酸铝材料的剥离与嵌入

Delamination and Intercalation of Layered Microporous Aluminophosphate [Al_2P_3O_(10)(OH_2)][C_6NH_8];

微孔层状磷酸铝材料的剥离与嵌入研究

The structure and delamination method of inorganic layered materials with different electric properties are described from their layered structures in this paper.

从无机层状化合物构造出发,描述了不同电性无机层状化合物的结构和剥离方法。

Research on shear stress of debonding plate-end of RC beam strengthened with CFRP;

碳纤维片材抗弯加固钢筋混凝土梁剥离界面剪应力试验研究

Experimental research on debonding failure of plate-end of RC beam strengthened with CFRP;

CFRP加固钢筋混凝土梁端部剥离破坏的试验研究

The FRP-to-concrete interfacial debonding is a fundamental key problem for the strengthening of RC structures with externally bonded FRP sheets/plates.

粘贴FRP片材加固混凝土结构的界面剥离是该加固技术的关键问题。

Study on temperature field of GaN material in laser lift-off technique;

激光剥离技术中GaN材料温度场的研究

Study the performance of AZ5214E image-reversal photoresist and its uses in lift-off technics;

AZ5214E反转光刻胶的性能研究及其在剥离工艺中的应用

The lift-off technic based on traditional photolithography using positive photoresist,which requests the thickness of photoresist must be more than that of thin film.

基于一般正胶光刻工艺的剥离工艺,所需胶膜的厚度要大大超过剥离薄膜的厚度。