elastohydrodynamic(EHD) lubrication

Inquires into the EHL calculation for planetary gear transmission in scraper conveyer,and its calculation formula is derived.

探讨了刮板输送机中行星齿轮传动的弹性流体动力润滑计算,并推导出相应的计算公式;分析了传动润滑状态与磨损的关系,为刮板输送机中行星齿轮传动的耐磨损设计提供了必要的理论依据。

The main achievements made by the research group of lubrication theory at Qingdao Technological University in the study on the two types of abnormal phenomena in elastohydrodynamic lubrication(EHL) are reviewed.

综述了青岛理工大学润滑理论研究团队对弹性流体动力润滑(简称弹流润滑)两种反常现象和与之相关的热粘度楔润滑机理研究的主要成果。

Numerical analysis of traction in elastohydrodynamic lubrication and evaluation of computing rheological models;

弹性流体动力润滑牵曳力的数值分析及流变模型评价

Oil-film has been widely used in large strip mill for its specical heavy load properties, its typical characteristics is elastohydrodynamic lubrication.

油膜轴承以其特有的重载负荷特性广泛应用于大型板带材轧机,其润滑特征为典型的弹性流体动力润滑,通过对油膜轴承在不同工况下的刚性与弹性油膜承载能力、油膜压力、油膜厚度的计算对比,可以计算出轴承在不同偏心率时承受的实际轧制力和膜厚分布,同时讨论了影响油膜承载特性的相关因素之间的一些关系。

The mathematical and finite element models were established to deal with elastohydrodynamic lubrication calcu-lation of main journal bearings of internal combustion engine.

建立了内燃机主轴承弹性流体动力润滑计算的数学模型和有限元模型。

To analyze the problem of elastic hydrodynamic lubrication of arc gear and to put forward some more simple and convenient calculation formulas by using modern research achievement in elastic hydrodynamic lubrication.

分析了圆弧齿轮的弹性流体动力润滑问题应用现代弹性流体动力润滑的研究成果，对单圆弧齿轮，提出了简便的弹性流体动力润滑计算公式并给出了算

elastohydrodynamic lubrication theory

弹性流体动力润滑理论

Studies on the Elastohydrodynamic Lubrication Films under Rolling/Spinning Conditions

旋滚条件下弹性流体动力润滑的研究

Some of the quantities involved in elastohydrodynamic lubrication may be mentioned.

下面提供一些与弹性流体动力润滑有关的量。

Gearing Elasto-Hydrodynamic Lubrication Based on the Ideal Model;

基于理想模型的齿轮传动弹性流体动力润滑研究

Elastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation and Block Distortion

计及曲轴和机体变形的曲轴轴承弹性流体动力润滑分析

Considerable literature has grown up relating to experimental confirmation of elastohydrodynamic theory.

关于弹性流体动力润滑理论的实验证明，已涌现出大量文献。

Elastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation under Load and Roughness Surface;

计入曲轴受载变形的粗糙表面曲轴轴承弹性流体动力润滑分析

Thermohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation under Load;

计及曲轴受载变形的曲轴轴承热弹性流体动力润滑分析

elastorheodynamic lubricant

弹性变流动力润滑剂

Numerical Analysis of Starved Elastohydrodynamic Lubrication for Elliptic Contacts

椭圆接触乏油弹性流体润滑数值分析

hydrodynamic theory of fluid lubrication

流体润滑的流体动力学理论

Study on Stability of Fluid Dynamic Lubricates and Bearing Rotor System;

流体动力润滑及轴承转子系统的稳定性研究

Experimental Study on the Drag Characteristics of Lubricating Oil in Boundary Lubrication

流体润滑状态下润滑油拖动特性的试验研究

Stress Analysis Within Contact Body of Cylindrical Roller Bearing Based on Elasto-Hydrodynamic Lubrication

弹流润滑中圆柱滚子轴承接触体内应力分析

THE HYDRODYNAMIC LUBRICATION RESEARCH ON THE PROCESS OF HYDROSTATIC EXTRUSION;

静液挤压过程中的流体动力润滑研究

EHL Lubricating Property Comparison among Emulsion-lubricated Journal Bearing Materials

乳化液润滑轴承材料弹流润滑性能比较研究

Strength design of WN gear transmission based on coupling of elastohydrodyamic lubrication and dynamics

基于弹流润滑与动力学耦合的WN齿轮传动的强度设计

The Effects of Surface Dent Depth on the Micro Elastohydrodynamic Lubrication

凹坑深度对表面动态弹流润滑的影响