Corrugated Roller

Design of Economical NC System for Corrugated Roller Grinding Machine;

瓦楞辊磨床经济型数控系统设计

Development of Expert System on the Tooth Design of Corrugated Roller;

瓦楞辊的齿形设计及专家系统的开发与应用

In this paper there are projects of NC reform of grinding machine for corrugating roller teeth with 8098 controller and special problems and countermeasures in it introduced.

本文介绍用８０９８单片机对瓦楞辊磨齿机床进行数控改造的方案，以及所遇到的特殊问题和解决方

The dynamic model of corrugating roller is established by FEM.

采用有限元方法,建立了瓦楞辊的有限元动力学模型,用ANSYS5。

The article gives a method to calculate the angle of the original paper s surrounding the top arc of corrugating roller, points out that the angle is a dynamic variable, and generalizes the changing rules of the angle after a real example calculation.

讨论了瓦楞原纸对瓦楞辊顶端包角的计算方法 ,指出总包角的大小是一个动态变化的值 ,并通过实例编程计算 ,得到了一个周期内该值的变化规

The LD3-15OD hanging-type ion bombardment hardening furnace is usedto conduct the ion bombardment hardening treatment for the large-size high-precision35CrMo steel corrugated roll.

叙述了用LD3-150D型吊挂式离于轰击强化炉，对35CrMo钢制高精度大型瓦楞辊进行离子轰击强化处理。

This paper analys electing material for corrugated roll and heat treatment.

本文对瓦楞辊材料的选择与热处理做系统的分析,探讨不同工艺方案的订制及对性能与寿命的影响。

By taking corrugated roll as an example,it was feasible to obtain uniform coating thickness by using up-center-down spray method,while it was beneficial to ensure high bond strength by controlling spray angle larger than 60° and substrate hardness lower than 60 HRC.

结果表明:采用HVAF制备的WC涂层的耐磨性是电镀硬铬层的10倍,涂层的耐腐蚀性和韧性明显优于电镀硬铬层的;以WC涂层在瓦楞辊中的应用为例,采用上中下位置喷涂方法制备的WC涂层厚度均匀,控制喷涂角度大于60°和基体硬度小于60 HRC对WC涂层的结合强度有利,WC涂层瓦楞辊的使用寿命是电镀硬铬瓦楞辊的4~6倍。

A unique cladding powder material to harden corrugating rollers surface was developed to tackle the severe dry friction abrasive wear.

针对瓦楞辊工况下强烈的干摩擦磨粒磨损,开发了一种专门针对瓦楞辊的旨在大幅提高耐磨性的激光熔覆材料体系。

With comprehensive analyzing many experiments on the medium frequency induction hardening,it is concluded an effective technology of medium frequency induction hardening on the teeth surface of corrugating roller.

通过对瓦楞辊齿面的中频感应淬火的多次试验 ,综合分析总结出一套对瓦楞辊齿面行之有效的中频淬火工艺方法。

This paper analysed the wear failure modes of a high- speed corrugating roll, indicating that its dominant wear mode is abrasive wear produced by the SiO2 particles embeded in the paper, showing the characteristics of strain fatigue abrasive wear on the bottom of flutes and both sliding and strain fatigue abrasive wear on the top of crowns.

本文对进口的高速瓦楞辊的磨损失效形式进行了分析,认为其主要磨损形式是磨粒磨损,即齿侧为滑动磨粒磨损,齿底为应变疲劳磨粒磨损,而齿顶则包括了这两种磨损形式;齿顶和齿根两侧都是磨损最严重的部位;磨粒主要是纸中夹带的SiO_2砂粒。

Calculation of the Wrap Angle of the Corrugated Paper around The Corrugating Roll

瓦楞原纸缠绕瓦楞辊顶端包角的计算

Study on Wear Resistance Behaviors of Hardening Coatings Sprayed on Corrugating Rolls Surface

瓦楞辊表面喷涂硬质涂层耐磨性研究

Research and Development on Parametric Design of Corrugated Roller and Its CAD System;

瓦楞辊参数化设计及其CAD系统的研究与开发

corrugated paper box [for packing]

瓦楞纸盒[装商品用

multi-functional slitting machine for corrugated paperboard

多功能瓦楞纸板切槽机

testing method for wet bursting strength of paper and paper board

瓦楞纸耐破度的测定法

Corrugator Plants: Plants that combine containerboard into corrugated board are called corrugator plants.

实际上指的是瓦楞纸板生产厂，他们把箱板纸加工成瓦楞纸板。

i'll move house, and so i need some corrugated cardboard boxes.

我要搬家了, 需要几个瓦楞纸箱子。

according the regulations the corrugated iron sheets lap 10 centimeters over each other.

按照规范瓦楞板需相互迭盖十公分。

Corrugated line machine installation, machine adjustment.

瓦楞纸板生产线设备安装，机器调试。

test method for adhension of corrugated fibreboard

瓦楞纸板粘合力试验方法

Corrugated fiberboard--Determination of thickness

GB/T6547-1998瓦楞纸板厚度的测定方法

Packing containers--Heavy duty corrugated box

GB/T16717-1996包装容器重型瓦楞纸箱

Packing material--Heavy duty corrugated fibre board

GB/T16718-1996包装材料重型瓦楞纸板

Corrugated fibreboard-Determination of pyl adhesive strength

GB/T6548-1998瓦楞纸板粘合强度的测定法

Corrugated board--Determination of bursting strength

GB/T6545-1998瓦楞纸板耐破强度的测定法

Corrugated box for export products

GB/T5033-1985出口产品包装用瓦楞纸箱

Corrugated fibreboard for export products

GB/T5034-1985出口产品包装用瓦楞纸板